Cetus X HD Brushless Quadcopter

Product detailed description

Step into the HD FPV world with the first Cetus X HD Brushless Quadcopter of the Cetus series. This 2S power quad offers Angle/Horizon/Air 3 flight modes, with a flight time of up to 5.5 mins. And is equipped with the Walksnail Avatar Mini HD VTX, compatible with various Walksnail goggles, effortlessly propelling you toward a dynamic high-power HD flight experience, with immersive high-definition visuals upon powering on. Empower beginners as a pilot to venture into the captivating HD FPV universe fearlessly. 

Bullet Point

• Entering the REAL FPV world with it. Launching the true beginner drone with Walksnail Avatar HD system. Starting with it can go a long way down the HD FPV journey.
• The Betaflight FC comes with the most popular firmware in the FPV community. Beginners can learn and understand more about FPV, which is an essential way to get drone experience.
• It has been redesigned to support the HD system. It now features a BT3.0 connector and an extra fan to cool down the Walksnail VTX, enabling a 5.5-minute flight time. One-piece durable PA12 frame inherited from the Cetus Series, provides excellent impact resistance against drops and impacts.
• The 360° protection of the whoop frame ensures safe indoor and outdoor flights. Meanwhile, the FPV camera supports 20°-40° adjustable degrees, which provides different views for pilots.

Specification

• Item: Cetus X HD Brushless Quadcopter
• Flight controller: F4 2S 15A V1.0 
• Receiver Protocol: SPI ELRS 3.0 Version
• Receiver Bind: Click the Bind Button
• VTX: Walksnail Avatar Mini HD VTX
• VTX Power: 25mW, 200mW, 500mW
• Flight Mode: Angle/Horizon/Air Mode 
• Max Flight Speed: 13m/s
• Camera: Walksnail HD Camera
• Camera Angle Adjustment: 20°-40°
• Battery: BT3.0 450mAh 2S Battery (2PCS)
• Battery Connector: BT3.0
• Charger: BT3.0 2S Battery Charger and Voltage Tester
• Propellers: Gemfan 2020 4-Blades Props
• Motor: 1103 11000KV
• Cooling Fan: 1504 Fan
• Wheelbase: 95mm
• Weight (without battery): 65g
• Takeoff Weight (with 450mAh battery): 92g
• Flight Time (8.7V-6.8V): 5.5 Mins
• Frame Material: PA12

Note: Due to the absence of the Position Hold Mode for the Cetus X HD Brushless Quadcopter, it is important to prioritize operational safety and familiarize oneself with the flight mode.

HD Digital VTX System

Experience an exceptional HD FPV flight with the Walksnail Avatar Mini HD VTX, boasting support for up to 1080P/60FPS resolution and a mere 22ms low latency, ensuring clear and detailed images in-flight. Benefit from multiple channels that minimize interference and signal loss, empowering pilots to confidently explore and capture footage at extended distances. 

Opt for HD for your drone, as they offer a superior visual experience with sharper, more detailed images and vibrant color reproduction. This enhanced clarity enables precise navigation, obstacle avoidance, and precise footage capture. HD visuals also allow for accurate evaluation and adjustment of camera angles and exposure settings, resulting in higher-quality moment capturing. Embracing HD visuals immerses you in the thrilling joy of drone flying, making HD the optimal choice for maximizing beginner flying capabilities and satisfaction.

Cetus X HD Frame Kit

It is the prime choice for FPV HD beginners, delivering enhanced propulsion and faster speeds with its 2S Power. Capture various moments during flights of up to 5.5 minutes. Equipped with the Walksnail Avatar Mini HD VTX and 500mW VTX, it ensures 300m flight video transmission. The redesigned canopy provides superior camera protection, while the durable PA12 construction ensures longevity. Enjoy a seamless experience with convenient features like BT3.0. Begin FPV Flying effortlessly in HD View with this Excellent quadcopter.

Flight Controller

The flight control F4 2S 15A V1.0 FC of this kit has been newly designed, a 1504 cooling fan with a connector to the flight controller to efficiently dissipate heat from the HD VTX board, and release the best performance. It also adds a 4-pin connector that enables effortlessly connection to HD VTX without the need for soldering. With the Betaflight FC version, pilots gain access to a wealth of FPV knowledge through the renowned Betaflight community.

Powerful Propulsion System

Equipped with the high-powered 1103 11000KV Brushless Motors, the drone gains enhanced thrust and speed, resulting in effortless flying. The combination with the high-performance Gemfan 2020 4-Blades Props ensures exceptional stability and precise control. Moreover, the BT3.0 450mAh 2S Battery extends the flight time significantly. This system empowers beginners to make drones ascend swiftly, accelerate, and execute diverse flight maneuvers, enabling them to relish an enriched flight experience and amusement. Additionally, it aids in adapting to various flight environments and swiftly responding to emergencies, facilitating the rapid mastery of flying skills.

Various Modes, Accessible to All

Cetus X HD Brushless Quadcopter supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate Turtle Mode by LiteRadio 3 Transmitter to flip it over and resume flying. 

Note: Due to the absence of the Position Hold Mode for the Cetus X HD Brushless Quadcopter, it is important to prioritize operational safety and familiarize oneself with the flight mode.

BETAFPV Cetus Series

BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, even from the Analog to the HD Series, the Cetus Series always satisfies customers' needs matter new beginners or seasoned pilots.

Recommended Parts

• Battery: BT3.0 450mAh 2S Battery (2PCS)
• Props: Gemfan 2020 4-Blade Propellers
• Motor: 1103 11000KV Brushless Motors

FAQ

• Top questions that pilots frequently asked about the Cetus Series
• Download the User Manual for the Cetus X HD Brushless Quadcopter
• Download the User Manual for the Walksnail Avatar HD Mini 1S Kit
• Download the Firmware and CLI dump file for the Cetus X HD Brushless Quadcopter
• Learn more about the ELRS 3.0
• Learn more about the Betaflight Firmware setup
• For drone and radio transmitter binding way and Betaflight Configurator, please refer to Chapter Binding the Quadcopter of the manual
• BEFORE USE, please read the manual to comply with safety regulations, including local drone laws

For INSTALLING and ADJUSTING the quadcopter correctly, please be aware of the following instructions:

• Camera angle adjustment: secure the camera housing and adjust the camera angle by loosening or tightening the screws on both sides
• Install BT3.0 450mAh 2S HV lithium battery with BETAFPV logo OUTWARD for proper quadcopter power connection
• When powering on the quadcopter, the 1504 fan for heat dissipation of the Walksnail Avatar Mini HD VTX will be automatically working

For reading and exporting the RECORDING VIDEOS from Walksnail VTX by a 4-pin connector, Here are the simple instructions for it. For more information, please refer to the manual.

Package

• 1 * Cetus X HD Brushless Quadcopter(Betaflight Firmware)
• 1 * BT3.0 450mAh 2S LiHV Battery
• 1 * 2S Battery Charger and Voltage Tester | BT3.0
• 4 * 2020 4-Blades Prop(Spare Set)
• 1 * Propeller Removal Tool
• 1 * Special Screw Package(Spare Set)
• 1 * Phillips screwdriver
• 1 * 4Pin Adapter Cable
• 1 * Avatar HD Mini Camera Manual
• 1 * USB Type-C Adapter Board
• 1 * JST Type-C Adapter Board